2) Click Apply All to Devices to start applying all the selected
access group(s) to the access control device or door station.
Caution
• Be careful to click Apply All to Devices, since this
operation will clear all the access groups of the selected
devices and then apply the new access group, which may
brings risk to the devices.
• You can click Apply Changes to Devices to only apply the
changed part of the selected access group(s) to the
device(s).
3) View the apply status in the Status column or click Applying
Statusto view all the applied access group(s).
The selected persons in the applied access groups will have the
authorization to enter/exit the selected doors/door stations
with their linked card(s) or fingerprints.
9. Optional: Click to edit the access group if necessary.
7.5 Configure Advanced Functions
You can configure the advanced functions of access control to
meet some special requirements in different scene.
Note
• For the card related functions(the type of access control card),
only the card(s) with access group applied will be listed when
adding cards.
• The advanced functions should be supported by the device.
• Hover the cursor on the Advanced Function, and then Click
to customize the advanced function(s) to be displayed.
7.5.1 Configure Device Parameters
After adding the access control device, you can configure the
parameters of access control device, access control points.
Configure Parameters for Access Control Device
After adding the access control device, you can configure its
parameters.
Steps
1. Click Access Control → Advanced Function → Device
Parameter .
Note
If you cannot find Device Parameter in the Advanced Function
list, Hover the cursor on the Advanced Function, and then Click
to select the Device Parameter to be displayed.
2. Select an access device to show its parameters on the right
page.
3. Turn the switch to ON to enable the corresponding functions.
69
