Figure 7-7 Add Timetable
3. Create a name for the timetable.
Note
You can click the color icon beside the name to customize the
color for the valid timetable on the time bar on the bottom of
the page
。
4. Select the timetable type.
General
Suitable for general attendance scene, which requires the
fixed start-work time and end-work time, and you can set
valid check-in/out time, allowable timetable for being late
and leaving early.
Flexible
Suitable for man-hour shift, which does not requires the
check-in/out time and only requires the staffs' working time
(from the start time you set) is equal or greater than the
predefined work hours.
5. Select calculation method.
First Check-in & Last Check-out
The first check-in time is recorded as start work time and the
last check-out time is recorded as the end-work time.
Each Check-In/Out
Each check-in time and check-out time is valid and the sum
of all periods between adjacent check-in and check-out time
will be recorded as the valid working duration.
You need to set Valid Auth. Interval for this calculation
method. For example, if the interval between card swiping
of the same card is less than the set value, the card swiping
is invalid.
6. Optional: Set Get Check-in/out Status from Device switch to
on to calculate according to attendance status of the device.
Note
Make sure the device support this function if you need to
enable this
7. If you select General as the timetable type, set the related
attendance time parameters as the following:
Start/End-Work Time
106
