After enabling the ECO mode, the device can authenticate
faces in the low light or dark environment. And you can set
he ECO mode threshold, ECO mode (1:N), and ECO mode
(1:1).
Note
Only device in the normal mode supports configuring ECO
mode parameters.
ECO Mode (1:1)
Set the matching threshold when authenticating via ECO
mode 1:1 matching mode. The larger the value, the smaller
the false accept rate and the larger the false rejection rate.
Note
Only device in the normal mode supports configuring ECO
mode parameters.
ECO Mode (1:N)
Set the matching threshold when authenticating via ECO
mode 1:N matching mode. The larger the value, the smaller
the false accept rate and the larger the false rejection rate.
Note
Only device in the normal mode supports configuring ECO
mode parameters.
ECO Mode Threshold
When enabling the ECO mode, you can set the ECO mode’s
threshold. The larger the value, the easier the device
entering the ECO mode. Available range: 0 to 8.
Note
Only device in the normal mode supports configuring ECO
mode parameters.
Work Mode
Set the device work mode as Access Control Mode. The
access control mode is the device normal mode. You should
authenticate your credential for accessing.
5. Click Save.
Enable M1 Card Encryption
M1 card encryption can improve the security level of
authentication.
Steps
Note
The function should be supported by the access control device
and the card reader.
1. Enter the Access Control module.
2. On the navigation bar on the left, enter Advanced Function →
More Parameters .
3. Select an access control device in the device list and click M1
Card Encryption to enter the M1 Card Encryption page.
85
