6.5.6 Set Authentication Mode
After adding the user's fingerprint, face picture, password, or
other credentials, you should set the authentication mode and
the user can authenticate his/her identity via the configured
authentication mode.
Steps
1. On the Add User or Edit User page, tap Authentication Mode
to enter the Authentication Mode page.
2. Select Device or Custom as the authentication mode.
Device
If you want to select device mode, you should set the
terminal authentication mode in Access Control Settings
page first. For details see Setting Access Control Parameters.
Custom
You can combine different authentication modes together
according to your actual needs.
3. Tap to save the settings.
6.5.7 Search and Edit User
After adding the user, you can search the user and edit it.
Search User
On the User Management page, Tap to enter the Search User
page. Tap Card on the left of the page and select a search type
from the drop-down list. Enter the employee ID, card No., or the
user name for search. Tap to search.
Edit User
On the User Management page, select a user from the user list to
enter the Edit User page. Follow the steps in Add User to edit the
user parameters. Tap to save the settings.
Note
The employee ID cannot be edited.
6.6 Import and Export Data
On the Transfer page, you can export the attendance data, the
user data, the user picture, the access control parameter, the
captured picture, and the exception data to the USB flash drive.
You can also import the user data, the user picture, and the
access control parameter from the USB flash drive.
6.6.1 Export Data
Steps
1. Tap Transfer on the Home page to enter the Transfer page.
28
