View Device Information
You can view the device information.
Tap Info. (System Information) → Device to enter the Device
page.
Note
Some device models do not support displaying the fingerprint
information.
Open Source License
View the Open Source License information.
Tap Info. (System Information) → License to enter the Open
Source Software Licenses page.
6.13 Two-Way Audio
After adding the device to the client software, you can call the
device from the client software, call the master station from the
device, call the client software from the device, or call the indoor
station from the device.
6.13.1 Call Client Software from Device
Steps
1. Get the client software from the supplied disk or the official
website, and install the software according to the prompts.
2. Run the client software and the control panel of the software
pops up.
3. Click Device Management to enter the Device Management
interface.
4. Add the device to the client software.
Note
For details about adding device, see Add Device.
5. Call the client software.
1) Tap Call on the device initial page.
2) Input 0 in the pop-up window.
3) Tap Call to call the client software.
6. Tap Answer on the pop-up page of the client software and you
can start two-way audio between the device and the client
software.
Note
If the device is added to multiple client softwares and when
the device is calling the client software, only the first client
software added the device will pop up the call receiving
window.
6.13.2 Call Master Station from Device
Steps
1. Get the client software from the supplied disk or the official
website, and install the software according to the prompts.
43
