You can set the fingerprint security level in this section.
Note
Some device models do not support the fingerprint related
functions.
Figure 6-13 Fingerprint Parameters
Security Level
You can select the fingerprint security level.
The higher is the security level, the lower is the false
acceptance rate (FAR).
The higher is the security level, the higher is the false rejection
rate (FRR).
The security level related false acceptance rate is shown as
below:
Fingerprint Security Level
FAR
1
0.1%
2
0.003%
3
0.001%
4
0.0003%
5
0.0001%
6.8.4 Set Time
You can set the device time and the DST in this section.
Tap Time (Time Settings) on the Home page to enter the Time
Settings page. Edit the time parameters and tap to save the
settings.
Figure 6-14 Time Parameters
6.9 Time and Attendance Status Settings
Set time and attendance status. You can set the attendance mode
as check in, check out, break out, break in, overtime in, and over
according to your actual situation.
Note
The function should be used cooperatively with time and
attendance function on the client software.
6.9.1 Disable Attendance Mode
Disable the attendance mode and the system will not display the
attendance status on the initial page.
36
