Figure 6-1 Welcome Page
2. Tap OK to save.
Note
• You can also change the settings in System Settings.
• If you install the device indoors near the window or the face
recognition function is not working well, select Others.
• If you do not configure the application mode and tap Next,
the system will select Indoor by default.
• If you activate the device via other tools remotely, the
system will select Indoor as the application mode by default.
6.2 Set Recognition Mode
After activating the device, you should select a face recognition
mode for better face authentication and collection.
Steps
1. On the Welcome page, after select the device application
mode, select Normal Mode or Deep Mode from the drop-
down list.
Normal Mode
Recognize face via the camera normally.
Deep Mode
In this mode, the device can recognize a much wider people
range than the normal mode. This mode is applicable to a
more complicated environment.
17
