3) Enter the property name.
4) Click OK.
3. Set the custom information when adding a person.
1) Select an organization in the organization list to add the
person and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure
2) In the Custom Information panel, enter the person
information.
3) Click Add to add the person and close the Add Person
window, or click Add and New to add the person and
continue to add other persons.
7.2.11 Configure Resident Information
If the person is resident, for video intercom purpose, you need to
set the room number for her/him and bind an indoor station.
After bound, you can call this person by calling the indoor station
and perform video intercom with her/him.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. In the Resident Information panel, select the indoor station to
bink it to the person.
Note
If you select Analog Indoor Station, the Door Station field will
display and you are required to select the door station to
communicate with the analog indoor station.
4. Enter the floor No. and room No. of the person.
5. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons.
7.2.12 Configure Additional Information
When adding person, you can configure the additional
information for the person, such as person's identity type,
identity No., country, etc., according to actual needs.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
60
