Note
• Controller represents the access controller, Unit represents
the secure door control unit and Reader represents the card
reader.
• Set the RS-485 address as 2 if you need to connect an access
controller or card reader.
4. Tap to save the network parameters.
Note
If you change the external device, and after you save the
device parameters, the device will reboot automatically.
6.4.4 Set Wiegand Parameters
You can set the Wiegand transmission direction.
Steps
1. Tap Comm. (Communication Settings) on the Home page to
enter the Communication Settings page.
2. On the Communication Settings page, tap Wiegand to enter
the Wiegand tab.
Figure 6-8 Wiegand Settings
3. Enable the Wiegand function.
4. Select a transmission direction.
• Output: A face recognition terminal can connect an external
access controller. And the two devices will transmit the card
No. via Wiegand 26 or Wiegand 34.
• Input: A face recognition terminal can connect a Wiegand
card reader.
5. Tap to save the network parameters.
Note
If you change the external device, and after you save the
device parameters, the device will reboot automatically.
6.5 User Management
On the user management interface, you can add, edit, delete and
search the user.
6.5.1 Add Administrator
The administrator can login the device backend and configure the
device parameters.
Steps
1. Tap User → + to enter the Add User page.
2. Edit the employee ID.
22
