GRASS VALLEY KARRERA, Installation & Service Manual

Page: 259 / 389

Installation & Service Manual
235
Video I/O Board and Mod I/O Board Configuration Data
Board Tile Button enhancements apply to I/O Config and IP/IO Config menu tabs.
Board Selection Board configuration settings:
• First system input on the board—Top left
• First system output on the board—Bottom left
• Board slot in Frame—Center
• Board type—Bottom right
• IP (Internet Protocol)
• FC (Format Conversion)
• GB (Gearbox)
• --- No board
I/O Config Menu Button and Labels
Inputs/Outputs Configuration Pane Buttons and Labels (Left)
Button/Label Description
Inputs
Input (1-16) Select the input for configuration from the top two rows of
data pads labeled System Input (on the right side of the
Configuration pane)
Labels System Input—Source Definition Engineering ID
Mode—Input modes based on Video I/O Board or Mod I/O
Board type selections:
• Gearbox Board: Bypass, MatchSync, Gearbox
• Format Conversion Board: Bypass, MatchSync, MatchDef
• IP: N/A (IP I/O Config menu)
•
Name—
System Input Name (Eng Setup, Source
Definition menu)
Line Rate—
Input video format
Crop—Crop On/Crop Off (Format Conversion Board)
BNC—Physical BNC on selected Video/Mod I/O Board
Outputs
Output (1-8) Select the output for configuration from the bottom row of
data pads labeled System Output (on the right side of the
Configuration pane)
Description Button/Label