GRASS VALLEY KARRERA, Installation & Service Manual

Page: 160 / 389

Basic Configuration
136
About Single Stream Full Frame UHD-4K
Output Menu Buttons and Data Pads
Button/Data pad/Label Description
UDP Port
UDP Port number to transmit data
Output Scroll through or directly select an output (values
reflected in Video I/O and Mod I/O Board buttons)
About Single Stream Full Frame UHD-4K
UHD-4K ST 2110-20 (2160p) single stream format can be configured for system IP I/O with
25Gb/s SFPs. Bulk configuration is also supported.
Streams/SFPs
25Gb/s SFPs can be configured in three input/output modes, 2/1, 4/2, and 8/4 input/output
streams. The 4/2 and 8/4 modes support single stream 4K ST 2110-20. Four inputs are
required to receive a 4K ST 2110-20 signal and four outputs are required to transmit a
4K 2110-20 signal. All three types are supported for the 4K TICO ST 2022-6 format.
I/O IP Config Bulk Configuration
Accessed by selecting the Bulk Configuration button in the IP I/O Config menu, you can
configure multiple System Input, Output, or SFP parameters with the Bulk Configuration
menus. Also, bulk configuration can be done by exporting, editing, and importing an Excel
spreadsheet offline, using the Import/Export Config File button see About Import/Export
Config File (Bulk Configuration) , on page 173.
IP I/O Config Bulk Configuration Menu
The Input, Output, and Port Config SFP Video Bulk Configuration menus are divided into
the SFP A and SFP B menu panes. The SFP B pane is for the Redundancy Mode and appears