GRASS VALLEY KARRERA, Installation & Service Manual

Page: 151 / 389

Installation & Service Manual
127
1 Enter the Aux Panel IP address into your browser.
Result: the Product Web Access page for the Aux Panel is displayed.
2 Select Panel Network on the left.
3 Enter the Ethernet IP Settings.
4 Scroll down and select CPL as the Connection Type.
5 In the LAN Primary Host IP field, enter the switcher IP.
6 Select the
Do reset
.
7 Select Save New Settings .
Connect the Remote Aux Panel to the Switcher IP Network
The Remote Aux panel connects to the switcher via Ethernet over an IP Network. To
connect, add the Remote Aux panel as a switcher node.
1 Select Eng Setup, Node Settings, Remote Aux IP Network in the menu.
2 In an unused row, select and enter values for the Aux Panel Name, Remote Aux IP
Address, and Suite number using the pop-up keypads displayed when you select each
data pad.
3 Under Aux Panel Type, select the Single data pad as the delegation.
Result: Status indicator LED turns green when connected.
Delegate Control of a Switcher Aux Bus to the Remote Aux Panel
Map the switcher Logical Aux Bus for Remote Aux panel control.
1 Select Eng Setup, Node Settings, Remote Aux Logical Map in the menu.
2 Select the remote aux panel under the Remote Aux Panel Name scrolling list on the left.
3 Select a Logical Aux Bus.
Result: The switcher Aux Bus sources can be mapped to and controlled by the Remote
Aux panel.
Map Switcher Sources to Remote Aux Bus Buttons
Map switcher sources to the physical source select buttons on the Remote Aux panel.
1 Select Eng Setup, Node Settings, Remote Aux Button Map in the menu.
2 Select the remote aux panel under the Remote Aux Panel Name scrolling list on the left.
3 Select a source from the Logical Sources or Fixed Sources columns (right) for your
Remote Aux source select buttons 1-32 in the Unshift column and 1-32 in the Shift
column.
Result: The mapped switcher Aux Bus sources can be controlled by the Remote Aux
panel.