GRASS VALLEY KARRERA, Installation & Service Manual

Page: 153 / 389

Installation & Service Manual
129
Install S25/S50 Remote Aux Panel Software
The NetConfig utility is used to install the Aux Panel software.
1 Install the NetConfig application from the K-Frame Installer (see the
Kayenne/Karrera/GV Korona Release Notes ).
2 Launch the Netconfig application.
3 Select the Load SW button (top-left).
4 In the “Select devices to load:” pane, select Routers , Jupiter .
5 Select the
S25
and/or
S50
Aux Panels and NetConfig will search for the panel IP
Addresses.
Result: Located Aux Panels of that type are displayed in the list, right.
6 Select the check box next to the panels to be updated.
7 Select the
Load
button below the list.
8 Reboot the Aux Panel to complete the installation.
Configure the Remote Aux Panel System
Configure the Remote Aux Panel System through the Product Web Access page.
1 Enter the Aux Panel IP address into your browser.
Result: the Product Web Access page for the Aux Panel is displayed.
2 Select Panel System on the left.
3 Set the parameters by entering values into the fields for Panel Device Name, Asset Tag,
etc.
4 Optionally, Disable S50 auto-shift for the bottom 25 buttons:
• Enabled : Bottom 25 buttons are auto-shifted.
• Disabled : 32 buttons starting with the top 25 and the first seven on the bottom,
from left to right, can be mapped. Enabling the shift button provides another 32
shifted sources, using the same buttons, for a total of 64 mappable buttons.
5 Select the Do reset .
6 Select Save New Settings .
Configure the Remote Aux Panel Network
Configure the Remote Aux Panel Network through the Product Web Access page.
1 Enter the Aux Panel IP address into your browser.
Result: the Product Web Access page for the Aux Panel is displayed.
2 Select Panel Network on the left.
3 Enter the Ethernet IP Settings.
4 Scroll down and select CPL as the Connection Type.
5 In the LAN Primary Host IP field, enter the switcher IP.
6 Select the Do reset .
7 Select Save New Settings .