GRASS VALLEY KARRERA Installation & Service Manual Download Page 209

Page: 209 / 389

Installation & Service Manual

185

ClipStore Configuration

ClipStore Configuration

ClipStore basic configuration includes preparing the Summit/Solo and GV K-Frame XP

systems through licensing, IP addressing, software installation, cabling, and GV Switcher

menu configurations.

Summit/Solo Software Version

The latest version of the ClipStore server software is available on the Grass Valley Switcher

Software Download site.

For more information about installing and updating AppCenter Elite software, see the

Summit/Solo manuals.

Setting the Summit IP Address

The ClipStore Summit/Solo server is shipped with the following defaults:

•

IP Address: 192.168.0.180

•

Mask: 255.255.255.0

•

Gateway: 192.168.0.1

•

WINS: disabled (0.0.0.0)

•

DNS: disabled (0.0.0.0)

You can temporarily change the default settings using Netconfig (see the

NetConfig

Network Configuration Application Instruction Manual

at www.grassvalley.com).

The NetConfig Network Configuration Tool can be installed with the K-Frame Switcher

Installer software.

IMPORTANT: Make note of the ClipStore IP Address, it will be used later

to enable ClipStores as external devices in the configuration process.

Install the ClipStore License

Verify that the GV Switcher software is version 15.0 or later. For information about

upgrading software, see the

Kayenne/Karrera/GV Korona Release Notes

Install the ClipStore license. The following are the ClipStore options:

•

KRR-CLPS-2CH-PAK (2-Channel Solo Server Platform)

CAUTION: Do not use AppCenter Elite software for ClipStore from the

Summit/Solo server web site as it might not be compatible.

Summary of Contents for KARRERA






































































































































































































































































































































































































Search results

Summary of Contents for KARRERA

Reviews:

Related manuals for KARRERA

Brands by name

Popular brands

GRASS VALLEY KARRERA, Installation & Service Manual

Search results

Summary of Contents for KARRERA

Reviews:

Related manuals for KARRERA

Brands by name

Popular brands