GRASS VALLEY KARRERA, Installation & Service Manual

Page: 110 / 389

System Cabling
86
Factory Default Network Settings
GV K-Frame XP
System Default IP Addresses
Devices IP Address
Video Processor Frame CPU 192.168.0.170
Image Store CPU 192.168.0.171
Control Panel Surface 1A 192.168.0.173
Touch Screen Menu Panel 1 (Kayenne/Karrera) 192.168.0.175
Touch Screen Menu Panel 2 (Kayenne/Karrera) 192.168.0.176
Control Panel Surface 1B 192.168.0.177
Control Panel Surface 2A 192.168.0.178
Control Panel Surface 2B 192.168.0.179
Clip Store 192.168.0.180
Kayenne/Karrera only: IP Address: 192.168.1.2
32-Crosspoint Remote Aux Panels Frame IP: 192.168.1.1
V1.6.5 and higher software: Gateway IP: 192.168.1.1
(hard reset with the front panel buttons) Subnet Mask 255.255.255.0
Note:
32-Crosspoint Remote Aux Panel default settings
must be changed to operate with a Kayenne/Karrera
system whose other components are configured with their
default IP addresses.
All Subnet Masks) 255.255.255.0
All Gateways
(except V1.6.5 software Remote Aux panel) 192.168.0.1
Following Reserved For Future Use
CAUTION: Do not connect any devices configured
with the following IP addresses to a
GV K-Frame XP network.
Video Processor Frame Gigabit Ethernet 192.168.0.172
PCU Panel Reserved LAN Port 192.168.0.174
Note:
Customer orders with multiple Control Panels will be pre-configured
to the listed IP addresses. However, if one of these additional Control Panels
is reset to factory defaults, it will be given the standard 1A default
192.168.0.173 address.
To integrate GV K-Frame XP system devices into an existing network, ask the local network
administrator for that network’s subnet mask. Before changing IP addresses always set the
subnet masks of the devices to the mask of the local network.