GRASS VALLEY KARRERA, Installation & Service Manual

Page: 193 / 389

Installation & Service Manual
169
Alternative Source Names
(first name to its left). If names are entered in all three alternative name columns, each area
of the system displays the name entered in each column of the Source Patch menu.
Menu
Source
It a good practice to create the least number of names possible. This ensures consistency in
the various displays and reduces the time needed to enter and edit the names. If you can
create short engineering names that work for both the production staff and engineering,
complete naming consistency is assured. However, this level of simplicity is probably only
feasible at a fixed installation where all the shows use the same source names. When
multiple names are created, try to keep the first four characters unique, and make different
names for the same source similar for ease of recognition.
Fixed Sources
Additional, fixed internal sources exist on a GV K-Frame XP system. These internal sources
do not have user accessible Engineering IDs and are not displayed on the Eng Setup Source
Definition menu.
Fixed Internal K-Frame Sources
Area Signals Source Patch Eng. Source Names
M/E 1, 2, 3, 4,
Pgm
A, B, C, D, Preview A,
Preview C, and M/E
Viewer (pM) outputs M1 A, M1 B, M1 C, M1 D, M1 pA, M1 pC, M1 pM
same for M2 - M4,
Pg A, Pg B, Pg C, Pg D, Pg pA, Pg pC, Pg pM
eDPM Video Out A, C eDA, eDC
Key Out A, B, C, D eDAk, eDCk
If Menu
Name is left
blank,
menus use
Transition
Area