GRASS VALLEY KARRERA, Installation & Service Manual

Page: 350 / 389

Maintenance
326
If the HADs are out of date, complete the following:
1 Enter the console menu by typing consoleMenu at the prompt:
->consoleMenu
Result:
2 Enter the number nine [9] for the Debug menu, at the prompt:
->9
Result:
3 Enter the number fifteen [15] for the Flash HADs menu, at the prompt:
->15
Result:
4 Enter the letter m [M] for the Multi Boot Configuration menu, at the prompt:
->M
Result:
5 Enter the letter Y to begin the reprogramming of the HADs, at the prompt:
->Y
Result: HADs are being erased and programmed which can be seen on the serial
console monitor. If successful, a confirmation similar to the following will be displayed
on the serial console monitor: