GRASS VALLEY KARRERA, Installation & Service Manual

Page: 177 / 389

Installation & Service Manual
153
Menu
IP I/O boards with Extended Input Buffer enabled are labeled as IP2 in the Video I/O Board
menu pane, bottom right of the button.
Extended Input Buffer Status is displayed in the IP I/O Config menu by selecting the
Streams/SFPs button in the Board Config pane of the Port Config SFPs menu tab. For the
menu to return a Yes , indicating the Extended Input Buffer is enabled, the correct IP I/O
board must be present and selected. Extended input Buffer is available for the 4 in/2 out
and 8 in/4 out SFP configurations with either 10Gb/s or 25Gb/s SFP board configurations.
Video I/O IP Setup and Configuration Overview
In the GV K-Frame XP Eng Setup, Video I/O, IP I/O Config menu, configure the Video I/O IP in
the following order:
1 Configure the SFPs
a Port Config SFPs (Local IP, Subnet Mask, Gateway),
b Inputs (Streaming Format, Redundancy, Receive IP, UDP Port),
c Outputs (Streaming Format, Redundancy, Transmit IP, UDP Port),
2 Review the IP Statistics Web Access page to verify stream throughput,
3 Troubleshoot any throughput issues, and
4 Verify timing for all sources using the Timing Analyzer in the Video Settings, Timing
menu ( Timing Analyzer , on page 269).
5 Optionally, configure Audio and/or Ancillary data.