GRASS VALLEY KARRERA Installation & Service Manual Download Page 326

Page: 326 / 389

Maintenance

302

Software Installation

Select

Panel Saver

(press

Bk 3/7

Once in panel saver mode, select the time period (in minutes) of inactivity required to

initiate the panel saver mode using the buttons below the display. The illuminated

button indicates the current setting.

Panel Saver Mode, E-MEM Area

Software Installation

GV K-Frame XP systems are shipped with the current software version installed. Updates to

GV Switcher system software are available for download from the Grass Valley website.

Software installation tools are provided with each update package.

Software Option Authorization

Some GV K-Frame XP system options have software components that can be enabled via an

authorization process, using authorization codes. Authorization codes are also used for

tracking maintenance contracts.
New systems ship with the appropriate authorization codes installed, enabling all

purchased options. When new optional features become available, Grass Valley sends new

authorization codes to the customers.

Authorization Codes

The authorization process involves receiving an authorization code from Grass Valley and

entering it in a menu on the system. The authorization code is associated with a particular

Video Processor, identified by a System ID#, and is not transferable to different hardware. If

you have multiple systems at your facility, you will need to enter an authorization code onto

each system.
Standard authorization codes (Permanent) apply to purchased options and maintenance

contracts. Other authorization codes (Temporary) may also be available that can enable

selected options for a limited time. Temporary authorizations can be used for trial

demonstrations and other special purposes. Temporary authorizations add to any

permanently enabled options, but these additional options are disabled after the allotted

time elapses.

Expiration Dates

Maintenance contract and temporary authorizations have expiration dates. Messages will

be posted on the GV Switcher menu when an expiration date approaches. Expirations occur

8804_09

Panel Saver

Summary of Contents for KARRERA






































































































































































































































































































































































































Search results

Summary of Contents for KARRERA

Reviews:

Related manuals for KARRERA

Brands by name

Popular brands

GRASS VALLEY KARRERA, Installation & Service Manual

Search results

Summary of Contents for KARRERA

Reviews:

Related manuals for KARRERA

Brands by name

Popular brands