GRASS VALLEY KARRERA, Installation & Service Manual

Page: 343 / 389

Installation & Service Manual
319
To remove an interior board, loosen the two left-most screws of the left adjacent board,
remove the remaining 4 screws of that left board, then remove the 6 screws of the right
adjacent switch board and carefully tilt the board out.
Transition Board Remove and Replace
Follow the general procedure above, except carefully unplug the wires connecting the
Lever Arm to the Transition board before you remove the screws holding that board to the
lid.
Multi-Function Board Remove and Replace
Follow the general procedure above, except after removing the screws you need tilt the
Multi-Function board down and unplug the wires connecting the Joystick to the Multi-
Function board.
Diagnostics
Capture Software Diagnostic Data
Software diagnostic data can be captured on a GV K-Frame XP Video Processor. This
information can be useful to Grass Valley engineers for troubleshooting purposes. Typically
this procedure is only used when the system is experiencing problems, and is done after a
Video Processor Frame reboot.
Note:
During the diagnostic data capture the GV K-Frame XP system may
remain functional, but system operation is not recommended at this time.
Leave the Software Diagnostic menu displayed and monitor the file save
process shown at the top of the menu to allow optimum information
collection.