Installation & Service Manual
325
Upgrade the HAD FPGA
d
Enter the network login at the prompt and press
Enter
.
e
Enter the network password and press
Enter
.
Note: The terminal will not show any response when entering the
password. This is a normal part of the SSH security.
f Type
consoleMenu
and press
Enter
.
g Re-enter the password.
NOTE: The default username for an SSH connection is “user” and the default
password is “gvuser”.
4
Serial Console Only: To check the HAD status, enter checkHADs at the prompt:
->checkHADs
Result:
HADs up-to-date:
value = 1 = 0x1
HADs out-of-date:
value = 0 = 0x0
Note:
The first time the consoleMenu is accessed, you must press Enter a
second time to display the menu. Thereafter, it is not necessary unless the
session is ended and a new session is started.
Summary of Contents for KARRERA
