GRASS VALLEY KARRERA, Installation & Service Manual

Page: 183 / 389

Installation & Service Manual
159
In the Inputs and Outputs tabs, the SFP Number column will reflect the Streams/SFP
configuration in the Board Config tab. For example, with a board configured as
8 inputs/4 outputs, then board inputs 1-8 will be on SFP Number 1 and board inputs 9-16
will be on SFP Number 5.
About the “Type” Column
The IP Config file Type column (scroll to the far right) provides a list of the IP I/O and SDI I/O
boards installed in the system, as of the last export. SDI board types can be configured for IP
so if an IP board were to be installed in that slot later, the imported IP Config file settings
would be applied.
Note: Pre-configured IP I/O settings in the SDI Type cells are
informational only, until a physical IP I/O board is installed in the Frame.
Spreadsheet Formatting Tip
To make the spreadsheet much easier to read and edit, format the alignment of the
heading cells to vertical (90 degrees). This will reduce the width of the spreadsheet
significantly.