GRASS VALLEY KARRERA, Installation & Service Manual

Page: 371 / 389

Installation & Service Manual
347
GV K-Frame XP Analog Reference Input
Video Standard Tri-level Sync or Color Black, must be 1/2X (times), 1X, or 2X the
Frame Operating Mode vertical rate
Return loss > 40db, up to 5.0 MHz
Connectors 2 BNC loop-through
Impedance 75 ohm external
Alignment jitter
≤
2 UI (SD),
≤
1 UI (HD)
Output Impedance 75 ohm
DC Offset
Not to exceed 50mV above or below the average peak-to-peak
signal envelope, with 75 ohm termination
GV K-Frame XP Control Network Connections
Type of connection 10/100/1000 Base T
Protocol TCP(UDP)/IP:
Auto speed detection,
Auto crossover cable configuration
Diagnostics Port mirroring
Cable and connectors CAT5 UTP, RJ45 connectors
Maximum Cable Length 100m / 300ft
Note: The GV K-Frame XP Video Processor has an internal Ethernet switch
with six available external ports. One connection is required for each
Control Panel and one is required for each Menu PC. An external Ethernet
switch is required to connect more than six devices.
GV K-Frame XP Power
Line voltage 100V-240V AC +/-10% autorange, power factor corrected
Automatic line-voltage sensing for 120V and 240V sources
Line frequency 50/60Hz +/- 5%
Maximum power
consumption Compact:1800W Standard: 2500W
Leakage current < 2.5 mA (per line cord)