GRASS VALLEY KARRERA, Installation & Service Manual

Page: 289 / 389

Installation & Service Manual
265
Note:
Do not change device or suite names unnecessarily, as this could
cause confusion to other system users.
Mapping Logical Remote Aux Panels
The GV K-Frame XP Remote Aux Logical Map menu is used to assign Aux Buses for control
by that Remote Aux Panel. Single Aux Panels can control one Aux Bus, while Multi-
Delegation panels can have several Aux Buses be assigned to delegation buttons on that
panel.
To Assign Aux Buses on a Multi-Destination Panel:
1 Select
Eng Setup, Node Settings
in the menu.
2 Highlight a Panel Delegation button at the top of the screen.
3 Select one of the Logical Aux Buses buttons on the lower screen. That Aux Bus will then
be selected when that Remote Aux Delegation button is pressed on that panel.
Remote Aux Button Mapping
The Remote Aux Button Map menu is used to configure sources to the Remote Aux Panel
source select buttons.
To Map Remote Aux Panel Buttons:
1 Select Eng Setup , Node Settings in the menu.