GRASS VALLEY KARRERA, Installation & Service Manual

Page: 149 / 389

Installation & Service Manual
125
3 Push down and hold any panel button. After three seconds panel buttons will light up
sequentially, indicating different available diagnostics.
4 When three buttons illuminate, release the held button. This places the panel in IP
Address reset mode, and one button will be flashing.
5 Press the flashing button. This resets the IP address to factory default.
GV-RAP-100 and GV-RAP-200 Remote Aux Panels
The GV-RAP-100 and GV-RAP-200 Remote Aux Panels provide control of GV K-Frame XP Aux
buses from a remote location (see GV-RAP-100 and GV-RAP-200 Remote Aux Panels , on
page 125 for cabling instructions). Both 32-Crosspoint Remote Aux panel models are
designed to select 64 external sources (32 unshifted/32 shifted). The 1RU GV-RAP-100 panel
is dedicated to a single bus. The GV-RAP-200 3RU model is multi-destination with 16 bus
delegate buttons (Aux1-Aux 16).
GV-RAP-100
Remote Aux Button Descriptions
GV-RAP-200
Aux Panel Row Button Label Description
GV-RAP-100 Top 1-16 16 Mappable Source Select buttons/
32 external sources total (16 unshifted/16 shifted)
per row
Bottom 17-32
GV-RAP-200 1 (Top) Aux 1 - Aux 16 16 Mappable Aux buttons
2 Blank Reserved for future
3 1-16 16 Mappable Source Select buttons/
32 external sources total (16 unshifted/16 shifted)
per row
4
17-32
Panel Operations button group (right side) GV-RAP-100/200:
RE
M
O
TE
A
U
X
P
AN
EL