GRASS VALLEY KARRERA, Installation & Service Manual

Page: 248 / 389

Basic Configuration
224
MatchDef Conversion Configuration Pane
Video I/O Board Configuration Data
Board selection button enhancements apply to I/O Config and IP/IO Config menu tabs.
Board Selection Board configuration settings:
• First system input on the board—Top left
• First system output on the board—Bottom left
• Board slot in Frame—Center
• Board type—Bottom right
• IP (Internet Protocol)
• GB (Gearbox)
• --- No board
MatchDef Conversion Configuration Pane
MatchDef Configuration Pane Buttons and Labels
Button/Label Description
Mode Bypass—Allows video to pass through without conversion
MatchDef—Incoming stream will be converted to the
Frame Operating Mode
Frame Operating Mode
Labels Format—Current Frame setting
Frame Rate—Current Frame setting
Aspect Ratio—
Current Frame setting
Auto Line-Rate Enable Enabled—Automatically detects line rate from incoming
stream (does not currently detect 4K modes) and displays
the incoming format
Disabled—allows pass through stream and manual line
rate selection in MatchDef (manually setting the line rate
can sometimes be used to correct incoming video from an
external device)
Line Rates 4K SDQS, 4K 2SI, 2160p, 1080p-A, 1080p-B, 1080p, 1080sf,
1080i, 720p, Std Def 4:3, Std Def 16:9 (Standard Def
buttons grayed out when in 4K Frame Operating Modes)
Crop/Matte Menu Tab Displays Crop status and launches Crop adjustment data
pads
Top Crop image from the top down
Bottom Crop image from the bottom up
Left Crop image from the left
Description Button/Label