GRASS VALLEY KARRERA, Installation & Service Manual

Page: 240 / 389

Basic Configuration
216
Save Default Multi-Suite Engineering Setup File
7 Select Eng Setup, Acquire Resources and select Yes to the warning message.
8 Select a resource in the Logical Resources pane (left).
9 Acquire resources:
a For ClipStore, IS Input, Multiviewers, Backgrounds, and M/Es, select the released
resource in the Physical Resource pane.
b For Image Store, DPM Channels, and eDPM Channels, use the right arrows in each
category (right) to move resources to the acquired
Units/Channels
for Image Store,
DPM Channels, and eDPM Channels.
Note: Any number of licensed iDPM channels can be acquired to the
selected resource, or acquired as eDPMs using the Acquire Resources
menu.
Save Default Multi-Suite Engineering Setup File
Save this Eng Setup configuration to disk, naming the file to identify it as the default multi-
suite engineering configuration for the facility.
Define and Save Default Suite Prefs
Define default Suite Preferences as appropriate for each suite. This is accomplished by
logging in to each suite individually, accessing the various configuration menus, setting the
available parameters, and then saving a Suite Prefs file for each suite while logged into that
suite.
Define and Save Default Panel Prefs
Similar to Suite Prefs above, Panel Prefs files can be created and saved for each control
surface, if you wish. For engineering troubleshooting purposes, you may be able to define
and save a single Panel Prefs file for use on any control surface.
To use different Panel Prefs for different control surfaces, create and save each Panel Prefs
file while logged into that suite and control surface. This is necessary for button mappings
on each suite’s control panel.
Multi-Suite Independent Operation
Once multiple suites are configured, operators can work on each control surface
independently. Coordination between operators will ensure resources for each suite are
shared as necessary.
Operators should also test any E-MEMs, R-MEMs, or other items created or saved previously,
to be sure they work properly with their currently acquired resources.
Engineering Login
Multiple suites can be configured for GV K-Frame XP systems, with each suite having up to
two control surfaces. The Eng Login menu is used to choose which suite and control surface
the switcher menu will interact with and control.