General Music S2 Turbo, Owner'S Manual

Page: 134 / 304

118 SAMPLE TRANSLATOR
Transmission errors If the connections have not been made correctly or if the external
device is unable to receive the sample in MMA_sds format, the following error message
will appear:
Check the connections. If no fault is discovered, check the reception channel of the
external device (the Music Processor transmits on channel 1).
It is also possible that the external device is unable to recognize the Music Processor’s
transmit message. In this case, return to the Waveform display and send a Dump Request
message from the external device, followed by the number of the sample to be received
(0~15).
“Exit”
This returns you to the Waveform display.
The “Info about” display
The “Info about” display allows you to modify these sample parameters:
• original sample pitch;
• definition of “Loop Start” and “Loop End” points;
• definition of loop type.
“Note”
Shows the original pitch of the sample. This information is not always received when a
sample is loaded, so it can often be necessary to define the correct pitch setting after
loading. To help you with this operation, use the Tuning function, which plays notes with
the exact Music Processor pitch. (Tuning plays a sinusoidal that is superimposed on the
sample).
“Note Link” The Note and SR parameters can be linked while Note is being modified.
When Note edit is accessed, the Note Link option will appear, and if this is selected, it
will modify SR at the same time as Note: