General Music S2 Turbo, Owner'S Manual

Page: 93 / 304

77
Set the tracks to Play or Mute
The tracks of a Performance can be set to “play” or can be temporarily deactivated -
“mute”. The “play”’ and “mute” track situations are related to the currently selected
Source. Each Source will require separate track “play/mute” settings.
For example, track 1 can be set to “play” status for the
LOCAL
Source and to “mute”
status for the
MIDI IN
Source.
The symbol that indicates “play” status active for all the Sources is “
e
”, “mute” is “ X ”.
1. Select a track (if not selected) with the relative
TRACK SELECT KEY
.
2. Press the relative
TRACK SELECT KEY
again to alter the track status.
Track volumes
There are two ways to change the track volumes:
a) by means of the Function Controllers;
b) in
EDIT PERFORMANCE
/
TRACKS
, page 2.
How to vary the track Volumes with the Function Controllers
In the S Series keyboard models, check that the
USER
/
PANEL
button is not inserted (led
off), then select the
VOLUME
button. Modify the volumes of the displayed tracks by
moving the relative Function Controller sliders. Each slider (A-F) corresponds to a track
identified by the same letters (A-F).
VOLUME A B E F G
FUNCTION CONTROLLERS
PAN SHOW FILTER 1 FILTER 2 RELEASE VOLUME
MASTER
6 7 4 5 2 3 1 USER
C D
PANEL ATTACK
In S2R, access page 3 of
EDIT PERFORMANCE
/
CONTROLS
:
Select the “Volume” parameter, then select a track and rotate the
DIAL
to modify its
volume level. Select other tracks and repeat the operation.
(8) Editing the Performance