General Music S2 Turbo, Owner'S Manual

Page: 69 / 304

53
2
L
OAD THE CONTENTS OF A DISK INTO MEMORY
Load all the instrument’s data from disk
It is possible to load, in a single operation, all the data required by the instrument to
make it work. The data necessary is the following:
Setup General, Sound Library, Effects Libraries, Clipboard.
GENERAL
General instrument settings (tuning, pedal assignments...).
SOUND LIBRARY
Ram-Sounds and modified Sound maps.
EFFECTS LIBRARIES
Effects maps assigned to the two DSPs.
CLIPBOARD
Edit page “Clips”.
Bank/Song Up to 10 Bank/Songs.
The Bank/Song consists of a Song and a Bank of 10 Performances. In the disk, the Bank/Songs
are organised in 10 Groups of 10 Bank/Songs. In memory, only one Group (10 Bank/Song) can be
loaded.
1.
If you need to load data from floppy disk, insert the disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3.
If a page other than the Load page appears, press the
LEFT MULTIFUNCTION BUTTON
REPEATEDLY
( = previous Page ) to go to the Load page:
4. Select the source element to load from (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNC
-
TION SELECT B
):
5. Select the required Bank/Song Group, by pressing the corresponding
FUNCTION SELECT
KEY
repeatedly until the number of the required Group appears next to the name of the
selected element.
6. Specify number 1, corresponding to the “Load All” operation. You are asked for
confirmation of the operation:
7.
Press
ENTER
to confirm (or
EXIT
to cancel).
(2) Load the disk contents into memory