General Music S2 Turbo, Owner'S Manual

Page: 52 / 304

36 INSTALLATION, POWER UP, DEMO
Load the contents of “Demo Disk 02” in Ram
The first method consists in turning off the instrument, replacing the floppy “Demo Disk 01” with “Demo Disk 02”
and repeating the procedure already explained for “Demo Disk 01”.
The second method consists in replacing the floppy “Demo 01” with “Demo 02” and using the Load All procedure,
which loads the contents of the floppy disk in R
AM
.
After changing disk and inserting “Demo Disk 02” into the drive, press the
DISK
button:
Specify the number 1 on the
NUMERIC KEYPAD
to start the Load All procedure. Confirmation of the operation will be
requested which, if given, cancels all the data already present in Ram, replacing it with the new data:
Press
ENTER
to confirm. The disk drive starts to operate and loads the entire contents of the “Demo Disk 02” floppy in R
AM
.
Playback the “Demo Disk 02” demo song
Press the
PLAY
button to listen to the single demonstration song contained in “Demo Disk 02”. Press
STOP
to stop the
playback.
Cancel the “Demo Disk 02” demo song from the Music Processor’s memory
After listening to the demo song, turn the instrument off then on again before proceeding with the reading of the manual. All the
songs previously loaded will be erased from memory.