General Music S2 Turbo, Owner'S Manual

Page: 95 / 304

79
How to vary the track transposition in
EDIT PERFORMANCE
/
TRACKS
Access
EDIT PERFORMANCE
/
TRACKS
by pressing the
PERF
.
TRACKS
button in the Edit section, and
go to the second page:
Edit Performance/Tracks, page 2
1. Activate the edit of the Transpose parameter.
2.
Select the first track to modify and enter the required transposition with the
DIAL
or the
NUMERIC KEYPAD
.
3.
With the parameter still in edit, select other tracks and repeat the procedure.
4.
Press
ENTER
to escape from the edit of the parameter.
Effects
The Sounds of the S Series can be directed to two effects processors (Effect 1 & Effect
2), which generate reverberations and modulations. The Effects are stored in the two
Effects Libraries (Effect 1 = reverbs, Effect 2 = modulations).
Each Performance can recall one effect from each processor (a reverb from Effect 1 and a
modulation from Effect 2). The Effects are assigned to the Performance in the first page
of
EDIT PERFORMANCE
/
CONTROLS
:
Edit Performance/Controls, page1
Each track can be individually programmed to play with or without the Effects assigned
to the Performance - these tasks are carried out in page four of
EDIT PERFORMANCE
/
TRACKS
:
Edit Performance/Controls, page 4
How to assign the Effects to a Performance
1. Access the first page of
EDIT PERFORMANCE
/
CONTROLS
, and select the required Effects. There
are two ways to select an Effect:
a) activate the edit of the parameter and rotate the
DIAL
, or specify the number of the
effect with the
NUMERIC KEYPAD
.
(8) Editing the Performance