General Music S2 Turbo, Owner'S Manual

Page: 104 / 304

88 PRACTICAL GUIDE
U
SER MODE
In this mode, both cursors (A-G) and keys (1-7) operate as programmed in the currently
selected Performance. The Function Controllers can be programmed in
EDIT PERFORMANCE
/
CONTROLS
, pages 3 and 4:
Keys
Sliders
The Function Controllers (sliders and keys) are independently programmable for each
Performance. In
USER
mode, you can assign a parameter and a track to each slider and key.
This will permit the control of tracks not currently shown in the display.
Example: Assign a Program Change to key 2 for track 16.
1. Select and activate the edit of “Key” 2.
2. Select a parameter to assign to the key, in this case a Program Change.
3. Press
ENTER
to pass to the second part of the line (“V”).
4. Assign a value to the Program Change.
5. Press
ENTER
to pass to the third part of the line (“Tr”).
6. Select a track number to which the Program Change is to be assigned.
Key 2 (in
USER
mode) will recall the indicated Program Change for track 16. This opera-
tion assigns the corresponding Sound to track 16 and sends the relative message (Program
Change 120 and Bank Select 3) to the M
IDI
O
UT
destination.
The S2R Function Controller
S2R contains a software Function Controller, accessed in page 3 of
EDIT PERFORMANCE
/
CONTROLS
:
1. Select a parameter in the options column (Volume, Attack, Release, Filter 1, Filter 2,
Pan). The central part of the display shows a graphical representation of the parameter
for the tracks that appear in the track column. The current parameter value is also
shown next to the horizontal bars.