General Music S2 Turbo Owner'S Manual Download Page 231

Page: 231 / 304

215

Save

Commands/options

The standard commands/options (disk, ramdisk, new disk, directory) also include the option
“S.compr.” (=

Sample compression).

s. compr

. Compresses the samples during the Save procedure. A compressed sample

occupies less space on the disk, meaning that the 2 Megabytes of Sample-Ram can be
stored on one floppy disk.

Note: Compressed samples are decompressed automatically during the Load procedure.

Save all

Saves the entire contents of the memory. The Bank/Songs are saved in the selected Group.

Important: The data being saved will erase the contents on disk. (The Groups not selected
remain unaltered).

Save all setup

Saves all the Setups present in memory (General, Sound Library, Effects Libraries, Clip-
board) and replaces those stored on the disk.

Save single setup

Saves one of the Setups in memory and replaces the one stored on disk.

1. Select “Save single setup”. The directory of the Setups in the memory is displayed:

“Save single setup”. The example given shows no Clipboard in the memory.

2. Select the Setup to save and confirm the operation.

Save all bank/song

Saves all the Bank/Songs of the Group selected. If the Group selected is empty (marked by
an asterisk: *) it is created automatically.

Save single bank/song

Saves one of the Bank/Songs in the memory in the Group selected. If the Group selected is
empty it is created automatically.

1. Select “Save single bank/song”. The directory of the Bank/Songs in the memory is dis-

played.

“Save — select source”. Directory of the
Bank/Song present in memory .

2. Select the Bank/Songs to save, and confirm. The directory of the Bank/Songs contained in

the Group selected on the disk is displayed (you can interrupt the operation by pressing

EXIT

, select another Group and repeat the operation):

“Save— select destination”. Directory of the
Bank/Song included in the Group selected (on disk).

3. Select location in which to save the Bank/Song and confirm.

Important: The Bank/Song occupying the location (of any) will be replaced by the Bank/
Song being saved.

(11) Disk

Summary of Contents for S2 Turbo

















































































































































































































































































































Search results

Summary of Contents for S2 Turbo

Reviews:

Related manuals for S2 Turbo

Brands by name

Popular brands

General Music S2 Turbo, Owner'S Manual

Search results

Summary of Contents for S2 Turbo

Reviews:

Related manuals for S2 Turbo

Brands by name

Popular brands