General Music S2 Turbo, Owner'S Manual

Page: 70 / 304

54 PRACTICAL GUIDE
Load a Group of Bank/Songs
A disk can contain up to 10 Groups of 10 Bank/Songs each. It is possible to load only one
Group (10 Bank/Songs) into the instrument’s memory.
1.
If you are loading from floppy disk, insert the disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3.
If a page other than the Load page appears, press the
LEFT MULTIFUNCTION BUTTON
repeatedly ( = previous page ) to go to the Load page:
4. Select the source element to load from (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNC
-
TION SELECT B
):
5. Select the required Bank/Song Group, by pressing the corresponding
FUNCTION SELECT
KEY
repeatedly. If at least one Bank/Song is present on disk, the number of the relative
Group will appear next to the name of the selected element.
6. Specify number 4, corresponding to the “Load all Bank/Song” operation. The instru-
ment requests confirmation of the current operation:
7.
Press
ENTER
to confirm (or
EXIT
to annul). The Songs and Performances contained in
Ram are cancelled and substituted by the data loaded from disk.
Load a Single Bank/Song
A single Bank/Song consists of a Song and a Bank of 10 Performances (maximum). It is
necessary to specify the source Group from which the Bank/Song will be loaded.
1.
If you are loading from floppy disk, insert the disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3.
If a page other than the Load page appears, press the
LEFT MULTIFUNCTION BUTTON
repeatedly ( = previous page ) to go to the Load page:
4.
Select the source element to load from (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNC
-
TION SELECT B
):