General Music S2 Turbo, Owner'S Manual

Page: 73 / 304

57
3
Save the contents of memory to disk
Save all the instrument’s data to disk
It is possible to save, in a single operation, all the data required by the instrument to
make it work. The data necessary is the following:
Setup General, Sound Library, Effects Libraries, Clipboard.
GENERAL
General instrument settings (tuning, pedal assignments...).
SOUND LIBRARY
Ram-Sounds and modified Sound maps.
EFFECTS LIBRARIES
Effects maps assigned to the two DSPs.
CLIPBOARD
Edit page “Clips”.
Bank/Song Up to 10 Bank/Songs.
The Bank/Song consists of a Song and a Bank of 10 Performances. In the disk, the Bank/Songs
are organised in 10 Groups of 10 Bank/Songs. When you save the Bank/Songs you must specify
the Group to which the Bank/Songs will be saved.
1.
If you are saving to floppy disk, insert a formatted disk into the disk drive.
2.
Press the
DISK
button to access the
DISK HANDLING
environment.
3. If a page other than the Save page appears, press the
LEFT OR RIGHT MULTIFUNCTION
BUTTON REPEATEDLY
to go to the Save page:
4. Select the destination element to save to (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNCTION SELECT B
)
5.
Select the Group of Bank/Songs, to which the Bank/Songs contained in memory are
going to be saved, by pressing the corresponding
FUNCTION SELECT KEY
repeatedly until
the number of the required Group appears next to the name of the selected element. An
asterisk (*) shows that the Group is empty; in this case, saving the Bank/Songs
contained in memory does not destroy the Bank/Songs eventually present on disk.
6. Specify number 1 corresponding to the “Save All” operation. The instrument requests
confirmation of the current operation:
7.
Press
ENTER
to confirm (or
EXIT
to cancel).
(3) Save the contents of memory to disk