General Music S2 Turbo, Owner'S Manual

Page: 103 / 304

87
P
ANEL
mode
In this mode, each cursor affects one of the seven tracks currently shown in the display.
Both cursors and tracks are identified by a letter of the alphabet (A-G). The tracks can be
scrolled but the correspondence between cursors and tracks is shown at all times be these
letters.
Six buttons are identified with the name of a Sound or Track parameter: Volume, Attack,
Release, Filter 1, Filter 2, Pan. The last button activates the Show function, which
displays the current status of the active parameter for the seven tracks.
Example: How to modify the Track Volumes
1. Select the
VOLUME
button (is necessary).
2. Regulate the volume of the seven track that appear in the display by moving the seven
cursors.
Example: How to modify the Release of the Sounds
1. Select the
RELEASE
button (if necessary).
2. Regulate the Release time of the Sounds assigned to the tracks which appear in the
display by moving the seven cursors.
The “
F
.
C
.” symbol
When a Sound* parameter is modified with the
Function Controllers in
PANEL
mode, the symbol
F.C.
(=Function
Controllers) appears in the top right hand corner of the main display.
This is a reminder that the Sound parameters have been altered with respect to the origi-
nal status memorised in the Performance. To recall the default status of the parameters,
select the “F.C. Reset” command which appears in the
SHOW
display (s. below).
The
SHOW BUTTON
This button activates a graphic representation of the currently active
parameter (Volume, Attack, Release, Filter 1, Filter 2, Pan):
This display is only an indicator of the current parameter status; the elements displayed
cannot be modified with the Data Entry commands. If, however, you move the cursors,
the graphic representation changes accordingly.
Each horizontal bar reflects the current status of one of the tracks shown in the display.
The current parameter value is also shown next to the bars.
To visualise the status of one of the other parameters, simply press the corresponding
button of the Function Controller group.
The “
F
.
C
.
RESET
” command in the
SHOW DISPLAY
Select this command to recall the default settings
of the parameters of the Sound (Attack, Release, Filter 1, Filter 2).
* Attack, Release, Filter 1,
Filter 2. parameters
(10) Real time Sound editing