General Music S2 Turbo, Owner'S Manual

Page: 197 / 304

181
2. Use the
DIAL
to select “All” and press
ENTER
twice to create 16 tracks with default values
(Sound = GrandPiano, Volume = 127, Transpose = 0 ...)
Cancelling the Song
You can cancel a Song and maintain the Performance Bank intact in the following manner:
1. Select the Bank/Song.
2. Press the
SONG
button in the Edit section. If the Playback display appears, select the “Edit”
option to recall the Edit Song display:
3. Select the “Erase Song” command and confirm.
Recording a new Song
Select the Bank/Song in which you want to record the new Song.
1. Press the
RECORD
to activate the Song “record” mode. The button starts to flash and the
“Record” display is shown, partially covered by a dialogue window which prompts you to
select the track or tracks to record:
2. Select the tracks to record using the corresponding
TRACK SELECT KEYS
. The tracks in
“record” mode are displayed with the letter “R”. The symbol
e
indicates the tracks already
recorded, the symbol - indicates the empty tracks. You can deactivate the tracks set to
“record” mode by pressing the corresponding
TRACK SELECT KEYS
again.
3. Press
ENTER
to confirm the track selection (or
EXIT
to escape from “record” mode). The
dialogue window now closes.
4. Select the parameters of the Song and/or tracks, and programme them as required.
quantize Quantization or auto-correction of imperfectly recorded tracks.
Default: Free. Value range: Free, 1/4 ... 1/96.
tempo Starting tempo of the Song.
time signature Division of the bar. This parameter cannot be modified after the Song
has been recorded.
Default: 4/4. Value range: 1/2 ... 15/16.
(8) Sequencer e Song
Options column
Track column Song parameters
Bank/Song name “Locator” (current Song
position)