General Music S2 Turbo, Owner'S Manual

Page: 129 / 304

113
• Loading a Sample or Program
1. From the Waveform display, after having selected a location for the sample, choose
the Load command:
2. Press
ENTER
and use the
DIAL
to select “Akai”:
3. Press
ENTER
; the directory of the Akai S1000 floppy disk appears. The Samples show
the letter “S” extension, and the extension on Programs is “P”:
4. Select a Sample or a Program with the
DIAL
, and press
ENTER
to load it into the Wave-
form.
• If you are loading a Sample, this will occupy the location selected in the Wave-
form.
• If you are loading a Program, all the samples already loaded will be cancelled and
replaced:
The following steps refer to the loading of a Program.
5. Press
ENTER
to confirm. If the Program has more than one Level, you must select the
one to be loaded:
6. Select the Level with the
DIAL
and press
ENTER
to load. Loading the Program may take
some time, and during the operation the display will show the name of the Samples
that are being loaded:
7. At the end of the conversion, the Waveform will contain the first 16 Samples of the
Level selected, all assigned to the keyboard ranges defined by the Akai Program and
correctly pitched:
Loading samples (“Load”)