General Music S2 Turbo, Owner'S Manual

Page: 179 / 304

163
Page 3: Pan Key Off Envelope (DC and DO Sounds) Page 4: Pan Tracking (DC and DO Sounds)
Page 1: Pan Envelope Control (DC and DO Sounds) Page 2: Pan Key On Envelope (DC and DO Sounds)
Pan
In DC and DO sounds, the position of the sound in the “stereo panorama” (Pan) can
be controlled dynamically by means of an envelope divided in two parts: the “Pan
Key On Envelope”, that regulates the pan during the period that the key is pressed,
and the “Pan Key Off Envelope”, that regulates the pan after releasing the keys
(Release phase).
The “Pan Tracking” programmed in page four modifies the “relative” position of
the sound across the keyboard extension. E.g. the sound in the bass section may be
further to the left while in the treble section it may be further to the right.
In SO sounds the Pan is static; therefore there is no Pan envelope. In the only
editing page available, you can link Pan to dynamics and Aftertouch.
Page 1: Pan Envelope Control (DC and DO Sounds)
Pan Envelope Activates/deactivates the Pan Envelope.
Status assignable: On/Off (---).
Pan dynamic sensitivity Sensitivity of the Pan to dynamic variations. Positive values move the sound further right by
increasing the dynamic force while negative values act inversely with increased dynamics.
Value range: -7 ... +7.
Pan touch sensitivity Sensitivity of the Pan to Aftertouch variations. Positive values move the sound further right
by increasing the Aftertouch pressure, while negative values act inversely with increased
Aftertouch.
Value range: -7 ... +7.
Page 2: Pan Key On Envelope
(DC and DO Sounds)
Commands The command/option column shows specific options for this page.
set loop Activates the loop (envelope repetition). Determines the starting point of the
envelope repetition. When the Pan Key On Envelope reaches its terminal point, it loops
back to the beginning. The cycle repeats continuously until you release the keys.
The loop is represented by an arrow which indicates the initial loop point.
To eliminate the loop, select its first segment again and then select “Set Loop”.
add segm Adds a segment. Inserts a new segment in the envelope curve immediately
after the currently selected segment. N.B.: a maximum of up to 10 segments is permitted.
del segm Cancels the segment selected.
zoom in Enlarges the field of vision of the envelope up to 4 times.
zoom out Reduces the field of vision of the envelope; it also cancels a zoom in. Reduces
the envelope up to three times its standard size.
(5) Edit Sound