General Music S2 Turbo, Owner'S Manual

Page: 113 / 304

97
For example, the Steinberg Cubase™ sequencer can send this message in various differ-
ent ways. In order to be received correctly by the S Series, it must be assigned to the
track of the Song (in Cubase the song is called, Arrangement). The Bank Select is in-
serted before the Program Change.
1. Create a track in one of the “Arrange” windows of Cubase:
2.
Create a Pattern at the beginning of the track:
3. Select the Grid command from the Edit menu. The “Grid Edit” palette will open.
4.
Select the “pencil” tool:
5.
Select the “Control Change 0” M
IDI
event. “Control Change 0” is called “Bank Se-
lect”:
6.
Assign the number to the “Bank Select” event (in the Val2 column in Cubase™). In
this window, Cubase™ shows the numbers according to the range “0 ~ 127” and not
the range “1 ~ 128” of the S Series; scale down by one number to insert the correct
Bank Select number.
7. Select the “Program Change” M
IDI
event. Insert the “Program Change” event directly
after the “Bank Select” event:
8. Assign the correct number to the “Program Change” event, bearing in mind that
Cubase™ conforms to the range “0 ~ 127” and not “1 ~ 128” of the S Series; scale
down by one number to insert the correct Program Change number.
Note: Sequencers of
other manufacturers will
most probably use
different procedures and
terminology. Consult the
relative owner’s manual.
(12) Selecting the Sounds via M
IDI