General Music S2 Turbo, Owner'S Manual, Page: 240 / 304

224 REFERENCE GUIDE
3. Select the Sound and select the “Import” command. The internal Sound Library is dis-
played showing the empty locations (-- -- -- --). Select an empty location in which to load
the Sound:
4. If necessary you can change the name of the imported Sound with the “Name” command.
5. You can also select a different location if necessary. Use the procedure you would use to
select a Sound.
6. Select the “Store” command to load the Sound to the location selected.
Imp.ramd Imports Sound from a Ram-disk. Loads a Sound from the Sound Library contained in the
Ram-disk. The Sound becomes part of the Sound Library in the memory.
Follow the same procedure described for importing a Sound from floppy disk.
Types of Sounds and their identification symbols
Rom-Sound Sound permanently resident in the Rom. These are not marked by any identification symbol.
Ram-Sound User-created Sounds, based on the Waveforms resident in Rom. These are marked with a
small dot after the name ( ).
Ram Sound User-created Sounds based on Waveforms created with Sample Translator or contained in
the Ram
Sound loaded from commercial floppy disks.
Sound Patch and Drumkit Combinations of Sounds of the types described above. These are identified by the symbol
“ ” (or by the symbol “ ” if they are user-created).