General Music S2 Turbo, Owner'S Manual

Page: 174 / 304

158 REFERENCE GUIDE
Parameters Tap
ENTER
to access the three parameters displayed under the Filter Key On Envelope
curve. Edit the selected parameter with the
DIAL
(“Time” and “Level” also with the
NUMERIC
KEYPAD
).
segment One of the envelope segments (1 - 10), whose end point is selected.
time Duration of the Segment. The maximum segment time is approximately 21 seconds.
Value range: 0 ... 127.
level The Cutoff Frequency variation which the end point of the selected segment must
reach. 0 corresponds to the Cutoff Frequency programmed, including the Filter Tracking
programming (see page four of Filter 1/2).
Value range: -63 ... +63.
Detailed procedure Follow these steps to access and modify the parameters:
1. Tap
ENTER
to select one of the parameters “Segment”, “Time”, “Level”.
2. Rotate the
DIAL
to select a segment or to modify its duration or level. You can
enter a “Time” and “Level” value on the
NUMERIC KEYPAD
.
3. Press
ENTER
to select the next parameter. After “Level” you will return to
“Segment”.
4. Select “Add segm.” to add a new segment after the selected segment. Select
“Del. segm.” to cancel the selected segment.
Page 3: Filter Key Off Envelope
Commands The option/command column shows specific options for this page.
set loop Activates the loop (envelope repetition). Determines the starting point of the
envelope repetition. When the Filter Key Off envelope reaches its terminal point, it loops
back to the beginning. The cycle repeats continuously until you release the keys.
The loop is represented by an arrow which indicates the initial loop point.
To eliminate the loop, select its first segment again and then select “Set Loop”.
A loop on the Filter Envelope causes a cycle of opening/closing of the Sound.
add segm Adds a segment. Inserts a new segment in the envelope curve immediately
after the currently selected segment. N.B.: a maximum of up to 10 segments is permitted.
del segm Cancels the segment selected.
zoom in Enlarges the field of vision of the envelope up to 4 times.
zoom out Reduces the field of vision of the envelope; it also cancels a
zoom in. Reduces
the envelope up to three times its standard size.
Parameters Tap
ENTER
to access the three parameters displayed under the Filter Key Off Envelope
curve. Edit the selected parameter with the
DIAL
(“Time” and “Level” also with the
NUMERIC
KEYPAD
).
segment One of the envelope segments (1 - 10), whose end point is selected.
time Duration of the Segment. The maximum segment time is approximately 21 seconds.
Value range: 0 ... 127.
level The Cutoff Frequency variation which the end point of the selected segment must
reach. 0 corresponds to the Cutoff Frequency programmed, including the Filter Tracking
programming (
s. page four of Filter 1/2). The Filter Key Off Envelope can terminate with
non-zero values.
Value range: -50 ... +50.