General Music S2 Turbo Owner'S Manual Download Page 196

Page: 196 / 304

180

REFERENCE GUIDE

The sequencer controls

The buttons situated directly below the display control the recording or playback of
a song:

record

Places the Song selected in “record” mode.

play

Starts the playback and the recording of the Song .

and

Fast forward and rewind of the Song. Holding them down increase the velocity

of the forward and rewinding action. These commands are not active during recording.

clock

Displays the metronome Tempo (clock) and allows you to modify it in real time by

means of the

DIAL

Creating a Song

Creating a Bank/Song

There are two ways to choose from: create a new Bank/Song or prepare a copy of an
existing Bank/Song.

(A) Creating a new Bank/Song:

1. Select the “Save Performance” command from the main display.

2. Specify the new Bank/Song to create.

3. Confirm the save operation. As well as a new Performance, a new Bank/Song which

houses the Performance is created.

Note: Ten Bank/Songs are already present by default. These can be cancelled with the
“Delete Bank/Song” function of the

UTILITY

button.

(B) Copying from another Bank/Song (both the Performance Bank and associated Song):

1. Select the Bank/Song to copy.

2. Press the

UTILITY

button to gain access to the Utility display:

3. Select the <Copy “Bank/Song”> option. You are prompted to specify a destination for the

copied Bank/Song:

4. Select the Bank/Song destination and confirm.

Creating a Performance with default values

You can reset all the tracks to default values:

1. Enter E

DIT

ERFORMANCE

RACKS

by pressing the

PERF

TRACKS

button in the Edit section:

Summary of Contents for S2 Turbo

















































































































































































































































































































Search results

Summary of Contents for S2 Turbo

Reviews:

Related manuals for S2 Turbo

Brands by name

Popular brands

General Music S2 Turbo, Owner'S Manual

Search results

Summary of Contents for S2 Turbo

Reviews:

Related manuals for S2 Turbo

Brands by name

Popular brands