68
PRACTICAL GUIDE
“Demo Disk 02”
This disk contains a demonstration song (“Classic”) and a piano Sound (“Piano
”)
based on a new Waveform.
You can load the contents of the disk using the “Load all” procedure.
If you are only interested in the new piano Sound, you can use the “Load single setup”
procedure, selecting the Sound Library.
To load the new pianoforte without substituting the current Sound Library, you can use
the “Imp_disk” command described below.
Load the new pianoforte from Demo Disk 02
1.
Press the
SOUND
LIBRARY
button to access the Sound Library:
2.
Select the “Imp_disk” (= Import from R
AM
-disk) command to see the R
AM
-Sounds
contained in Demo Disk 02:
3.
Given its large dimensions, the “Gr_Piano2
” Sound is the only one present in the
disk. It is already selected. Select the “Import” command to confirm the selection; the
Sound Library is shown with free locations, (-- -- -- --):
4.
Select the “Store” command to load the Sound “Gr_Piano2
” to the selected loca-
tion.
The new Sound will be imported to the internal Sound Library and it can be assigned
to a track using the standard procedure. You can save the updated Sound Library to a
new floppy disk; this will save the Sound “Gr_Piano2
” and relative Waveform.
Summary of Contents for S2 Turbo
