General Music S2 Turbo, Owner'S Manual

Page: 209 / 304

193
Microscope
The Microscope operations permit you to edit every event recorded in the currently
selected Track. It also permits the insertion of new events without actually playing
them on the keyboard, by means of the Insert function.
The events recorded in the track are shown in the Event List shown at the centre of
the display.
Accessing the events of the Event List and their parameters
1. Select the track whose events you want to display in the Event List.
2. Scroll the Event List with the
DIAL
. As the notes are selected they are played so
that you can check them immediately.
3. Enter the parameters of the event selected with the
MULTIFUNCTION KEYS
:
Note Event, Modifies parameter 1V.
Note event, Modifies the parameter Locator
4. Modify the parameter value with the
DIAL
or the
NUMERIC KEYPAD
.
5. Escape from the event edit mode with
ENTER
(or
EXIT
to cancel the modifica-
tions). At this point you can select another event and repeat the edit procedure.
Moving to a specified bar
If there is no event in edit, you can go directly to a bar by specifying its number on
the
NUMERIC KEYPAD
.
1. If necessary, escape from the edit of the event currently being edited (by pressing
ENTER
or
EXIT
).
M
ICROSCOPE
Editor
Commands/options
MULTIFUNCTION KEY
function
indicator
Event List
Position of the event Parameters 1V, 2V, 3V,
Gate
Type of event (‘Status’)
M
ICROSCOPE
Editor in edit
(9) Edit Song