General Music S2 Turbo, Owner'S Manual

Page: 50 / 304

34 INSTALLATION, POWER UP, DEMO
S2R: “S
OUND
T
EST
”
In the main display (set to “Sounds” mode) and in the Sample Translator, pressing
ENTER
activates the Sound Test,
which allows you to listen to the Sound and check the M
IDI
O
UT
connection, regardless of the status of the keyboard
(even if not connected).
Sound Test in the main display
If you press
ENTER
when the main display is showing “Sounds” mode, the Sound assigned to the currently selected
track (in reverse highlight) will play:
Press
ENTER
to hear the Sound “Devil” and
an expander connected to the S2R M
IDI
O
UT
.
You will also play the Sound assigned to the corresponding track of the expander connected to the S2R M
IDI
O
UT
.
The Sound Test can be programmed in the
EDIT GENERAL
environment:
1.
Press the
GENERAL
button in the Edit section to gain access to
EDIT GENERAL
:
2. Specify the number 5 on the keypad to access the display Sound Test :
3. Modify the note and the dynamic value. The factory settings are, however, suitable for most situations.
4. Select the “Memorize” command with the
FUNCTION SELECT KEY G
. The setting will be permanently memorised until
replaced by a new setting.
5. Return to the main display by pressing
NORMAL
.
Sound Test in the Sample Translator
In the Sample Translator pressing
ENTER
will play the note indicated by the “SR” parameter in the Info About display.
The note is not sent to the M
IDI
O
UT
.