General Music S2 Turbo, Owner'S Manual

Page: 86 / 304

70 PRACTICAL GUIDE
6
S
ONG
P
LAYBACK
/
THE
S
EQUENCER CONTROLS
Load a Song using the standard procedure
Before playing back a Song contained in a disk you must load the relative Bank/Song.
You can load a single Song (procedure
[
DISK
] [
LOAD SINGLE BANK
/
SONG
] ) or all ten Bank/Songs
that can be stored in memory (procedure [
DISK
] [
LOAD ALL BANK
/
SONG
] ).
The procedure is described in the section in chapter Load the contents of a disk into
memory, and in the Reference guide, Disk chapter.
Use Preload to load a Song in background
Preload allows you to load a Song while another one is in playback. Together with the
relative Bank/Song, the Sound Library and Effect Libraries Setups are loaded (if different
from the ones currently residing in memory, and if the “Auto” option is selected).
Preload is a great time saver, particularly during a concert.
1. While a Song is in playback, press the
PRELOAD
button. The list of the Bank/Songs
contained in the disk and the relative Group selected is displayed:
The “Auto” option must be selected (as shown).
If it is not selected, press the
FUNCTION SELECT KEY D
.
2.
Select the source element to load from (disk =
FUNCTION SELECT A
; R
AM
-disk =
FUNC
-
TION SELECT B
).
3.
Select the required Group by repeatedly pressing the
FUNCTION SELECT KEY
correspond-
ing to the selected disk option (
A
or
B
).
4. Specify the corresponding number of the Bank/Song to load on the
ALPHANUMERIC
KEYPAD
.
5. The Bank/Song will be loaded in the first or second Bank/Song location according to
the following rule:
- in the first location (Bank/Song 1) by default;
- in the second location (Bank/Song 2) if Bank/Song 1 is selected.
More information regarding Preload and the “Auto” option appears in the Reference
section.
How to select the Song
Follow the standard procedure used to select a Bank/Song (s. User Interface section).