FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 71 / 547

CHAPTER 2 WIRING
Description of I/O Signals
2-27
2
2.5 Description of I/O Signals
2.5.1 I/O Signals of VS Type
List of input signals
The signal assigned to the sequence input terminal or to IQ area can be specified with a parameter.
No. Name Setting range
Default
value
Change
PA03_01 CONT1 signal assignment 49
PA03_02 CONT2 signal assignment 0
PA03_03 CONT3 signal assignment 0
PA03_04 CONT4 signal assignment 0
PA03_05 CONT5 signal assignment 0
PA03_06 CONT6 signal assignment 0 (IQ)
PA03_07 CONT7 signal assignment
1 to 58
0 (IQ)
Power
Function list (sequence input signal)
(1) Signals assignable to CONT1 to 5 (sequence input terminals)
The signals which are turned on and off by an external signal. You can select five signals in
the table below.
No. Function No. Function
1 Servo-on [S-ON] 10 Forced stop [EMG]
6 Home position LS [LS] 34 External braking resistor overheat
7 +OT 49 Interrupt input
8 -OT
(2) Functions assignable to CONT 6 and 7 (IQ area)
The signals which are turned on and off from IQ area. You can select two signals in the table
below.
IQ area other than CONT6 and CONT7 cannot be changed.
No. Function No. Function
14 ACC0 29 Proportional control
17 Gain switch 32 Positioning cancel
19 Torque limit 0 57 Anti resonance frequency selection 0
20 Torque limit 1 58 Anti resonance frequency selection 1