FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 115 / 547

CHAPTER 2 WIRING
Description of I/O Signals
2-71
2
You can change parameter reference values when the over write completion signal has been
turned on.
(2) Parameter read
Select a parameter type in the data selection area.
A parameter is loaded with the activation of read command according to the table below.
When the read command is turned off, the read completion is also turned off.
Name Area
Switching PA1_nn, PA2_nn, or PA3_nn
bit 8 to 11 position in %QW ＊ .14
Parameter settings (%QD
＊
.0)
Parameter no. Low order byte in %QW ＊ .14
The loaded parameter data is established when the read completion signal has been turned
on.
(3) Positioning data overwrite
Positioning data is overwritten with the activation of write command according to the table
below. When the write command is turned off, the over write completion (13) is also turned off.
Name Area
Positioning data designation
bit 8 to 11 position in %QW ＊ .14
Position data of positioning data
%QD ＊ .8
Speed data of positioning data
%QD
＊
.10
Stand still timer of positioning data
%QW ＊ .12
Positioning data status
High order byte in %QW ＊ .14
Positioning data no.
Low order byte in %QW
＊
.14
OFF
Write command
(Parameter)
Over write completion
ON
OFF
ON
OFF
Read command
(Parameter)
Read completion
ON
OFF ON